Community C6-B Manuel d'utilisateur télécharger pdf

COMMERCIAL DESIGN SERIES

CEILING LOUDSPEAKERS

C4-CATR

Can Adapter / Trim Ring for C4 and C4LP

C6-CATR

Can Adapter / Trim Ring for C6

C6-CATR-B

Can Adapter / Trim Ring for C6-B

C8-CATR

Can Adapter / Trim Ring for C8

C4-NCB

New Construction Bracket for C4 and C4LP

C6-NCB

New Construction Bracket for C6 and C6-B

C8-NCB

New Construction Bracket for C8

C4-GRL-B

Black Grille for Painted C4 and C4LP Installations

C8-GRL-B

Black Grille for Painted C8 Installations

ABOUT WIRING

Wiring of the loudspeakers is not discussed in this

accessory guide. For information on wiring, please see

the complete Commercial Design Series Ceiling

Loudspeaker Installation and Operation Manual at

www.communitypro.com. The installer must route the

wires and connect them properly before the loudspeaker

installation is completed.

NOTICE:

Every effort has been made to ensure that the

information contained in this guide was complete and

accurate at the time of printing. However, due to ongoing

technical advances, changes or modifications may have

occurred that are not covered in this manual. The latest

version of this manual and the most recent product

information published by Community is always available at

http://www.communitypro.com.

WAIVER OF LIABILITY

Whenever Community Light and Sound, Inc. (CLS), dba

Community Professional Loudspeakers is requested to provide

advice or material regarding the design or installation of its

equipment such advice or material is intended and provided for

information purposes only. The advice or material is only

intended to familiarize the user with various options for design,

coverage and installation. User expressly agrees that CLS shall

not be liable for any damages, whether in tort, contract, strict

liability or otherwise consequential, incidental or otherwise to

person or property as a result, directly or indirectly, of the use of

any advice or material. The user of any advice or material

provided by CLS assumes all risk and liability for the use

thereof. Without limitation to the above, CLS does not accept

liability or responsibility for the performance of any

manufacturer, design, method, use, material or technique

employed by the acoustic designer and/or installation company.

All advice, information or material is subject to field variations

and environmental conditions. All advice, information, or

material given is offered on the assumption that common or

standard practices for installation used in the construction trades

is applied to all phases of the user’s project. Actual assembly or

configuration must be performed only by persons with

knowledge of mechanical trades and rigging, where applicable.

Any installation method must be certified by a Professional

Engineer licensed in the state in which assembly or

configuration is located.

BRACKETS AND ACCESSORIES GUIDE

CAUTION: Installation of loudspeakers

should only be performed by trained and

qualified personnel. It is strongly recommended

that a licensed and certified professional structural

engineer approve the mounting design.

1 2 3 4

Résumé du contenu

Page 1 - CEILING LOUDSPEAKERS

COMMERCIAL DESIGN SERIESCEILING LOUDSPEAKERSC4-CATRCan Adapter / Trim Ring for C4 and C4LPC6-CATRCan Adapter / Trim Ring for C6C6-CATR-BCan Adapter /

Page 2 - Figure 3:

The Commercial Design Series (CDS) Can Adapter/Trim Ring(CATR) is intended for use when a CDS ceiling loudspeaker isbeing mounted in either an existin

Page 3 - Figure 4:

Community offers three sizes of New Construction Brackets(NCB) suitable for 4.5-inch, 6.5-inch, and 8-inch diameterCommercial Design Series (CDS) ceil

Page 4 - COMPATIBLE INDUSTRY BACK CANS

NOTE: On some "Torsion" model enclosures, the internal torsion hardware may need to be removed prior to installingthe CATR. Torsion models