Community DXP4800 Guide d'installation Page 1

DXP4800 Loudspeaker Management System INSTALLATION GUIDE Owner’s Manual

EQ - EQ paramters OUT_1:XXXXXX MENU:EQ EQ# :1 BW:0.33oct LEVEL:0.00dB Q=4.36 FREQ :1000Hz TYPE:Param  Refer to the Input Menus fo

Limit - Output Limter OUT_1:XXXXXX MENU:Limit THRESH :+20.0dBu ATTACK :100ms RELEASE:32x  THRESH - Limit Threshold. Ranges from -20

SYSTEM-SETUP MENU:Recall PROG:01 NAME:XXXXXXXXXXXX  PROG - Program Number to be recalled..  NAME - Program Name of the program. Th

Copy - Copy channels SYSTEM-SETUP MENU:Copy SOURCE:In1 TARGET:In2 Copy Channels from the source to the target. When the Source and Targets ar

 SAMPLING RATE: - Sampling Rate selection. The unit can operate under 48kHz or 96kHz sampling rate according to this option. The device has to be sh

7.0 Quick Reference Parameters Menu <<Menu>> Field <<Cursor>> Min Max Steps Units Level Signal LEVEL -40 +15 0.25 dB Polar

8.0 PC Control Software The DXP4800 is shipped with a special PC Graphic User Interface (GUI) application - XLink. XLink gives the user an option to

9.0 Specifications Inputs and Outputs Input Impedance: >10k Ohms Output Impedance: 50 Ohms Maximum Level: +20dBu Type: Electronically bala

10. Warranty and Service Information The Community DXP4800 Electronic System Controller is warranted in the USA to be free from defects in material

receipt, the service center will determine if the problem is covered under warranty. If covered under warranty, the product will be repaired or repla

REFERENCE TO EC STATEMENT OF CONFORMITY This document confirms that the range of products of Community Professional Loudspeakers bearing th

333 East 5th Street, Chester, PA 19013-4511 U.S.A. Phone (610) 876-3400 Fax (610) 874-0190 www.loudspeakers.net

© 2004 Community Light & Sound, Inc. 040624JL Community DXP4800 Owner’s Manual Page 21

Table of Contents 1.0 Introduction...4 2.0 Features...

1.0 Introduction Welcome! You’ve joined the group of people that have chosen high quality Community loudspeaker systems, accessories, and components

2.0 Features  4 Inputs and 8 Outputs with flexible routing  32-bit (40-bit extended) floating point DSP  48/96kHz Sampling Rate Selectable  H

3.0 Front Panel Functions 3 1 4 6 5 2 1. Mute keys - Mute/Unmute input and output channels. When an input channel is muted, a red LED will c

4.0 Rear Panel Functions 1,2,3 4 6 5 4 1,2,3 1. Main Power - Connects via a standard IEC socket. A compatible power cord is supplied wi

5.0 Powering Up the Device After powering up the unit, the following initialization screen is displayed on the LCD: ** COMMUNITY ***** DXP4800

 LEVEL - Gain, -40.00dB to +15.00dB in 0.25dB steps.  POL - Polarity, can be normal (+) or inverted (-).  DELAY - Delay in 21us steps. Can be di