Community C6-B Instructions d'exploitation télécharger pdf (Page 12)

Community Commercial Design Series Installation and Operation Manual Page 12

3. Insert appropriate ittings and tighten

suficiently for wire path concealment and

strain relief, in accordance with applicable

codes.

Figure 9. Conduit for Protected Wiring to Can

Conduit ϐitted to the top cover plate of the can,

which has a knockout strain relief for this

purpose.

Figure 8. Non-Conduit Guided Wiring to Can and Wire Restraint

(Only use this method when permitted by applicable building and electrical codes!)

Terminal Block (6” model)

Terminal Block showing wire

connections to the block for a

single cable (not daisy-chained)

Built-in cable strain relief

Cover/strain relief plate

swiveled into closed position

and secured to clamp the

cable ϐirmly. Note the 3/4

inch (19 mm) knockout in

the cover that may be used

for conduit.

4. You can use lexible or rigid conduit (as

required by local electrical codes).

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Community C6-B Instructions d'exploitation Page 12