Community R.35COAX Instructions d'exploitation Page 3

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 16
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 2
R.15COAX, R.35COAX, R.35-3896 Installation and Operation Manual Page 3
UNPACKING AND INSPECTION
Community R-Series loudspeakers are engineered and
manufactured to be rugged and they are carefully packed
in sturdy cartons. Make sure that the number of cartons
shown on the freight documents have actually been
delivered. It is wise to thoroughly inspect each unit after it
has been removed from the packaging, as damage could
occur during shipping.
Please note that once the shipment has left your dealer
or the Community factory, the responsibility for damage
is always borne by the freight company. If damage has
occurred during shipping, you must le a claim directly
with the freight company. It’s very important to contact the
freight company as soon as possible after receiving your
shipment, as most freight companies have a short time limit
within which they will investigate claims. Be sure to save
the carton and the packing material, as most claims will be
denied if these materials are not retained. Your Community
dealer and the factory will try to help in any way they can,
but it is the responsibility of the party receiving the shipment
to le the damage claim.
It is always a good idea to retain the carton and packing
materials indenitely, if possible, in the event that the unit
may need to be returned to your dealer or distributor for
repair.
IN THE CARTON
Each shipping carton contains the following items:
One (1) R-Series Loudspeaker
One (1) Steel Mounting Yoke
One (1) Weather Cover and Gasket
Weather Cover Mounting Hardware: Pan Head Screws
[R.15: 3.5 x 13mm (x4); R.35: 3.5 x 19mm (x6)]
One (1) 13.5mm (.5") ID Gland Nut
One (1) Operation and Installation Manual
One (1) Warranty Card
Yoke Mounting Hardware: 8x32 mm threaded studs
(x2), 8mm lock washers (x2), 8mm at washers (x2),
8mm hex nuts (x2),and 2" OD rubber gaskets (x2), All
8 mm hardware is stainless steel.
SYSTEM INFORMATION
PHYSICAL FEATURES / GENERAL DESCRIPTION
The R.15COAX and R.35COAX are two-way, full-range
loudspeaker systems, and the R.35-3896 is a three-way
full-range loudspeaker. All of these models are designed to
provide high quality voice and music reproduction in outdoor
direct exposure applications in the harshest environments.
They are designed to withstand long-term exposure to
tough, environmental conditions, indoors or outdoors, and to
provide many years of trouble-free service while maintaining
their out-of-the-box performance and appearance.
The modied trapezoidal shape emulates a traditional
enclosure, and presents a compact modern look. The
enclosures are constructed of UV-stabilized ABS plastic
and designed with interior ribbing and other internal
structural support for added rigidity. This reinforcement
allows for improved low frequency performance as well as
a stronger, less resonant enclosure. The R.35 models have
additional weather-treated wooden inserts to reduce rear
and lateral radiation. All models are available in a standard
light grey, black or white matte paintable nish with options
for custom colors that can be specially ordered. The steel
mounting yoke and grille are color matched to the cabinet
for all models. Hardware required to mount the yoke to the
installation surface must be customer supplied.
R.15 AND R.35 FEATURES / TECHNOLOGY
The smaller R-Series loudspeakers offer numerous features
and technologies that provide unprecedented sonic quality
and installation exibility. Some of these include:
Unique full-range compact high output loudspeakers
with advanced passive crossover technology
All models are weather-resistant, suitable for outdoor
direct exposure
All-weather ABS plastic UV stabilized reinforced
enclosure
Protective steel grilles and mounting yokes are
covered with a rugged, zinc-rich epoxy dual-layer
powder-coat nish for superior resistance to weather
Stainless steel hardware
All models are available in light grey, black or white;
custom colors are also available
Includes built-in autoformer for 70V / 100V applications
DANGER: It is essential that a safety cable
(not supplied) be utilized whenever an
R-Series Loudspeaker is installed. The safety
cable must be secured to a suitable load-bearing point
separate from the loudspeaker mounting point, with as
little slack as possible so as not to develop undue
kinetic force if the mounting bracket (yoke) were to fail.
The safety cable should be attached to the integrated
SS loop on the rear of the cabinet. Refer to the Product
Features images on the next page.
Vue de la page 2
1 2 3 4 5 6 7 8 ... 15 16

Commentaires sur ces manuels

Pas de commentaire