Community R.35COAX Instructions d'exploitation Page 10

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 16
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 9
Installation and Operation Manual R.15COAX, R.35COAX, R.35-3896 Page 10
FIELD SERVICE
Any driver or crossover service required is accessed from
the front of the enclosure by rst removing the front grille
and then unscrewing and removing the LF driver or the horn
assembly. Take note of wiring positions prior to removing
any drivers from the loudspeaker. In order to maintain the
weather resistance, components and assemblies must not
remain removed from the loudspeaker any longer than
needed for replacement. Exposure of internal components
to the elements for extended periods could cause failures
and void the warranty on the loudspeaker.
q Remove the grille. Refer to illustrations in Figure 7. The
grille frame locks into the enclosure frame. Carefully insert a
thin at bladed screwdriver between the grille frame and the
enclosure frame while gently pressing down on the grille.
Starting at the top and moving down, twist the blade to
pop the grille frame free of the enclosure. There is a safety
tether at the bottom of the grille that can be unhooked to
fully remove the grille.
q Remove the screws holding the LF driver in the face and
replace or service the components as necessary.
q Replace the driver securing it with all of the original
hardware. Reattach the grille safety tether to the face and
push the grille frame into place - one side and then the
other, ensuring that the frames are fully seated. The grille
should easily snap into place.
Figure 7. Remove grille (R.15 shown)
Unhook grille tether
to fully remove grille
Insert thin blade of screwdriver
between frame and enclosure
and move down seam while
twisting to pop grille loose
CUSTOMER SUPPORT
INFORMATION AND APPLICATION ASSISTANCE
For more information on installing and operating your
R-Series loudspeaker, please refer to Community’s web site
at www.communitypro.com. For application support, service
or warranty information, refer to Community’s web site or
contact Community's TAG Team (Technical Applications
Group) for additional assistance at 610-876-3400 or toll-
free (US and Canada) at 800-523-4934.
To obtain specic warranty information and available
service locations for countries other than the United States
of America, contact the authorized Community Distributor
for your specic country or region.
Vue de la page 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire